| High
Speed Slip Rings |
|
Due to the continous involvement in
Research and Development by Zeonics Systech in the field of Aerospace Engineering
and also in the field of Airborne Components. We have developed and
manufactured High Speed Slip Rings
which are capable of operating at Speeds of 18,000 rpm and a maximum
Voltage of 100Volts D.C. and current of
5Amperes. These Slip Rings are cooled by Nitrogen at around 10PSI. Please
find herewith our standard Slip Ring Chart.
|
|
|
| Type Cooling forced |
Max.
Speed |
Bearing
Capability |
No. of Channels |
Max. Voltage |
Max. Current |
| ZE/SR/001 Air/N2
|
5000rpm |
22,000rpm |
4 |
100VDC |
5 Amps |
| ZE/SR/002 Air/N2 |
10000rpm |
22,000rpm |
4 |
100VDC |
5 Amps |
| ZE/SR/003
Air/N2 |
15000rpm |
22,000rpm |
4 |
100VDC |
3 Amps |
| ZE/SR/004
Air/N2 |
18000rpm |
22,000rpm |
4 |
100VDC |
3Amps |
|
|
|
|
The
Slip Rings are very useful for sending electrical current from
a stationery object to a rotating object through its shaft and
as a Result the Slip Ring becomes a Nodal Component for all
High Speed joints to pass electrical Voltage and Current in
different equipment. The Typical shaft Diameter is 10mm and
shaft length of 30mm Flexible coupling can be supplied as an
optional accessory. |
|
Many of our Slip
rings are used for Ground based Aircraft Testing requirements
and also for specialised armaments requirements.
|
|
Kindly
contact us for specific requirement
|
|
Top |
